ATEN Technology KL1508A Manual de usuario descargar pdf (Pagina 24)

KL1508A / KL1516A User Manual

Single Station Installation

In a single stage installation, there are no additional KVM switches daisy

chained down from the KL1508

A / KL1516A. To set up a single stage

installation, refer to the installation diagrams starting on page 15 (the numbers

in the diagram correspond with the numbers of the instruction steps), and do

the following:

1. Ground the KL1508

A / KL1516A by connecting one end of the grounding

wire provided with your switch to the grounding terminal, and the other

end of the wire to a suitable grounded object.

Note: Do not omit this step. Proper grounding helps to prevent damage to

the unit from surges or static electricity.

2. Plug the console keyboard, monitor, and mouse into the unit’s console

ports. The ports are color coded and marked with icons for easy

identification.

Note: You can use any combination of keyboard and mouse connections.

For example, you can use a PS/2 keyboard with a USB mouse.

3. Use Cat 5e/6 cable to connect any available KVM port to a KVM adapter

cable that is appropriate for the computer you are installing (see KVM

Adapter Cables, page 5 for details).

Note: To support a resolution of 1280x1024, the recommended maximum

distance between the unit and the KVM adapter cable is 50 meters.

4. Connect the KVM adapter cable to the computer.

Plug the connectors on the KVM adapter cable into the appropriate ports

of the computer you are installing. (See KVM Adapter Cable Installation

Diagrams, page 16 for connection examples.)

5. Plug the female end of the power cord into the KL1508

A / KL1516A's

power socket; plug the male end into an AC power source.

After the KL1508

A / KL1516A is cabled up, you can turn on the power. After

it is powered up, you can turn on the servers.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 95 96

Sin comentarios

ATEN Technology KL1508A Manual de usuario Pagina 24